| P01 |
Unit Selection |
0 = kilometers (km), 1 = miles (mi) |
| P02 |
Voltage Level Setting |
Select from 36V / 48V / 60V / 72V (Default: 48V) – Undervoltage protection adjusts automatically based on selection |
| P03 |
Wheel Diameter |
Range: 8.0–12.0 inches, step: 0.5 (Default: 10.0 inch) |
| P04 |
Speed Sensor Magnetic Pole Count |
Range: 1–100 (Default: 30) – Adjust according to motor design for accurate speed display |
| P05 |
Cruise Control Setting |
0 = Off, 1 = On – When enabled, cruise control icon appears on the display |
| P06 |
Start Mode |
0 = Zero Start (throttle works instantly), 1 = Non-zero Start (must push first) |
| P07 |
Speed Limit Setting |
Range: 10% – 100% of top speed. Enter 00 for full power (100%) |
| P08 |
Auto Sleep Time |
0 = No sleep; 1–30 = Sleep after X minutes of inactivity (Default: 5 minutes) |
| P09 |
Display Backlight Brightness |
1 = Dim, 2 = Medium, 3 = Bright (Default: 2) |
| P99 |
Factory Reset |
Enter P99, then press and hold the "+" button for 5 seconds to reset all parameters |
| ODO |
Odometer Reset |
Navigate to ODO, then press and hold the "+" button for 5 seconds to clear total mileage |
