🧰 Operation & Daily Maintenance – Off-road Electric Scooter

🛑 Brake Maintenance

If you experience brake failure or unusual noises, inspect the following based on the brake type:

  • Disc Brakes

    • Check if the brake disc is bent

    • Inspect brake pads (wear level)

    • Make sure the brake cable is tight and responsive

  • Drum Brakes

    • Check brake shoe wear

    • Regularly clean dust inside the drum housing

  • Hydraulic Brakes (Oil Brakes)

    • Inspect pads, discs, adjustment screws, and brake cables

    • Perform oil refill and air bleeding if braking is weak (requires time & specialized tools)

🛞 Tire Maintenance

  • Regularly check tire pressure, especially for air-filled tires

  • Underinflated tires increase rolling resistance, reduce range, and cause faster wear

  • Inflate tires to the recommended PSI listed on the sidewall

🚲 Frame & Body Maintenance

  • Check all frame screws and bolts, especially around the folding mechanism and handlebar joints

  • Use lubricant regularly on:

    • Bearings

    • Folding joints

    • Other rotating or movable parts

  • DO NOT use high-pressure water for cleaning

  • After riding in rain, wipe down the scooter to prevent rust and wear

🔋 Battery Replacement

  • Always match the voltage specifications (e.g., replace a 48V10Ah battery with a 48V15Ah)

  • After replacing the battery, some spark discharge may occur at the connector

    • To avoid this, press the power button before connecting the battery

âš¡ Replacement of Electronic Components

  • Be careful with pin connectors during replacement

  • Do not force or misalign connectors to avoid bending or breaking the pins

  • Double-check wiring before powering on